Versitile Indicator Mounting

Scale mounting is critical not only for ease of use, but to allow for your indication to go where ever your scale platform is. These mounts can provide for several purposes including; external keyboards, lights, writing space, storage space, and helps to keep working area clear of cables and other equipment that may be attached.

Customized in-line conveyor system for weighing slit steel. It was required to cut out a section of existing line and mount weighing assemblies to weigh each steel roll as it passed. All fabrication and installation was completed in 1 day on-site. This particular system, not only weighs each coil, but also automatically prints each coil weight.

INDICATOR MOUNTS

SCALE GUARDS

5601 Enterprise Blvd.

Toledo, Ohio 43612

 

Phone: 419-729-5240

Fax: 419-729-0462

Email: generalmail@scaletechltd.com

American 
Association
For Laboratory
Accreditation
Lab Code: 2369.01

American

Association

For Laboratory

Accreditation

Lab Code: 2369.01

Loading.............

FILLING STATION

Customized filling application. Unit fills bags to desired weights and reverses auger so there is no spillage.

HEAVY DUTY COIL SCALES

Unlike most other coil scales, the S-Tech utilizes a full 12" structural H-Beam frame bolted to a durable 1/2” steel deck, providing exceptional rigidity under severe loading conditions (typical of large fork lifts and overhead cranes). This design has proven so superior that the S-Tech carries a full 2-year warranty on the deck structure. The cross sections are constructed of the same 72# H-Beam. The placement of underdeck supports on the S-Tech minimizes deflection in all directions. Intermediate supports are added to prevent the top plate from “dishing” under heavy point loads.

©2003-2016 Scale Tech Limited Privacy Policy And Disclaimer: Use of this site is subject to additional terms and conditions.

Protect Your Eqipment

Protecting your investment is a priority. With a customized floor scale bump guard, you can prevent any accidental damage caused by every day use while loading and unloading scale platforms. Guards are made with heavy gauge steel and can be mounted with concrete anchors to insure stability.

TANK WEIGH HOPPER CONVERSIONS

Pictured to the right is the old load cell configuration. Scale-Tech modified all base plates and mounting hardware to directly mount new style load cell mounts to customer’s existing 80,000 lb. hoppers. Rice lake EZ mounts and 520i indicators were used for this application.

Enlarge
Enlarge
Literature